Sensors / Amplifier Integrated Type

Able to detect and display pressures of 10 kPa or less Can copy to up to 10 switches simultaneously Reduced setting time, Minimized risk of setting mistakes 3-step setting With display low-cut function (zero-cut function) “0” is displayed within the effective range Series Type Rated Pressure Range ZSE30AF Compound Pressure –10.00 to 10.00kPa

・Modular type mountable ・Series ARM10/11 mountable ・Selectable pressure unit ・With anti-chattering function ・Power-saving mode Series Type Recommended nozzle dia. ISE35 Positive pressure －0.1 to 1MPa

・Non-Contact Sensor for Workpiece Placement Confirmation・Gap detection・Can be configured with a regulator and 2 port solenoid valve.・With LED level meter・Plug connector. Easy to add and remove manifold stations.SeriesDetection rangeRecommended nozzle dia.ISA20.01 to 0.25 mmφ1.5ISA20.03 to 0.50 mmφ2.0

・Check at a glance if the workpiece is placed or not・The clearance distance between the detection surface and the workpiece can be　found intuitively.・Simple Setting: Setting is possible while checking the displayed value・Energy Saving: Air consumption 60% reduction・Improved drainage resistance: 10 times or moreSeriesRated distance rangePiping specification Supply sidePiping specification Detection sideISA3-F0.01 to 0.03 mmRc, G 1/8φ4, φ6 One-touch fitting, G 1/8ISA3-G0.02 to 0.15 mmRc, G 1/8φ4, φ6 One-touch fitting, G 1/8ISA3-H0.05 to 0.30 mmRc, G 1/8φ4, φ6 One-touch fitting, G 1/8

・Electronic Pressure Switch・Plug-in port for One-touch fittings.・With LED light.SeriesTypeSet pressure rangePS1000Positive pressure－0.1 to 0.45MPaPS1100For vacuum/residual pressure－0.1 to 0.4MPaPS1200For vacuum－100 to 0kPa

・Can be integrated with ZX ejector system.・Suction filter comes as standard.SeriesTypeSet pressure rangeZSP1Vacuum pressure－20 to －101kPa

・Can be integrated with ZX or ZR ejector system.・Suction filter comes as standard.SeriesTypeSet pressure rangeZSE2Vacuum pressure0 to －101kPaISE2LPositive pressure0 to 100kPaISE2Positive pressure0 to 1MPa

・Can be integrated with ZM ejector system.SeriesTypeSet pressure rangeZSE1Vacuum pressure0 to －101kPaISE1LPositive pressure0 to 100kPaISE1Positive pressure0 to 1MPa

・Built-in failure prediction output function.・Can be integrated with a vacuum unit, Series ZX.・Suction filter comes as standard.SeriesTypeSet pressure rangeZSE3Vacuum pressure0 to －101kPaISE3LPositive pressure0 to 98kPaISE3Positive pressure0 to 0.98MPa

・Suitable for a wide variety of fluids with stainless diaphragm ・IP65 ・RoHS compatible ・Low leakage. VCR®, Swagelok® compatible fittings can be selected. ・Back piping, underside piping Click here for the digital switch setting system Series Type Rated pressure range ZSE80F Compound pressure －100.0 to 100.0kPa ZSE80 Vacuum pressure 0.0 to －101.0kPa ISE80 Positive pressure －0.100 to 1.000MPa ISE80H Positive pressure －0.100 to 2.000MPa

・2-Color Display  ・Metal body type (Aluminum die-casted) ・IP67 ・With M12 connector Series Type Rated pressure range ISE70 Positive pressure (For air) 0 to 1MPa ISE75 Positive pressure (For general purpose fluids) 0 to 10MPa ISE75H Positive pressure (For general purpose fluids) 0 to 15MPa

・Low profile 9.8 mm・Vertical mounting space reduced to approx. 1/2　(Compared to ZSE/ISE30A series)・Simultaneous copying is possible for maximum 10 units.・3-step settingSeriesTypeRated pressure rangeZSE10FCompound pressure－100.0 to 100kPaZSE10Vacuum pressure0.0 to －101.0kPaISE10Positive pressure－0.100 to 1.000MPa